Alignments
EN 47LC4.1E AB 8.
8.5.3 Hotel Mode Functions
This paragraph describes the functionality of each item in the
Hotel Mode Setup menu.
HOTEL MODE
• “OFF”: The Hotel Mode is disabled: (MTV Mode)
– The TV set operates as a normal consumer TV.
– The User Menu can be accessed.
– All setting can be changed.
• “ON”: The Hotel Mode is enabled:
– The User Menu is blocked.
– The volume level is limited (to the maximum volume
level entered in the Hotel Mode Setup).
– All settings of the Hotel Mode Setup menu are in effect:
ON CHANNEL,
CHANNEL BLANK,
KEYBOARD LOCK,
ON VOLUME,
OSD DISPLAY.
ON CHANNEL
On user switch-on, the TV set tunes in on the specified
channel.
CHANNEL BLANK
• “OFF”: The current channel is not blanked (normal visible;
DEFAULT value).
• “ON”: The current channel is blanked.
CHANNEL BLANK can be set for every channel. Use [P+ / P-]
to go through all the channels and set the desired status per
channel. The channel number is visible in the top left corner.
KEYBOARD LOCK
• “OFF”: The VOLUME +/- , PROGRAM +/- and MENU keys
of the TV set function normally.
• “ON”: The VOLUME +/- , PROGRAM +/- and MENU keys
of the TV set are blocked.
MAX VOLUME
The volume will not exceed the specified volume level.
ON VOLUME
On user switch-on, the specified volume level is actual.
Remark: "ON VOLUME" cannot exceed the MAXIMUM
VOLUME level (the volume level, specified in the Hotel Mode
Setup menu).
OSD DISPLAY
• “OFF”: Screen information is suppressed (except for some
VGA input, if present).
• “ON”: Normal screen information is displayed (e.g.
channel information).