Philips LC4.2E User Manual

Alignments
EN 65LC4.2E AA 8.
8.3.5 Sound
No adjustments needed for sound.
The default values for the audio alignments are:
• QSS: On
• FMI: Off
• NICAM Alignment: 63
• Lip Sync: Off
• DBE: Off
8.3.6 Options
Options are used to control the presence/absence of certain
features and hardware.
How to change an Option Byte
An Option Byte represents a number of different options.
Changing these bytes directly makes it possible to set all
options very fast. All options are controlled via seven option
bytes. Select the option byte (OP1.. OP7) with the Menu Up/
Down keys, and enter the new value.
Leaving the OPTION submenu saves the changes in the
Option Byte settings. Some changes will only take effect after
the set has been switched “off” and “on” with the AC power
switch (cold start).
Note: The option values mentioned in the table below are
subject to change.
Table 8-2 Option values per model
17PF9946/12 23PF9946/12 26PF9946/12
Option
Byte
Total Dec Values Total Hex Values Total Dec Values Total Hex Values Total Dec Values Total Hex Values
OP1 154 9A 154 9A 154 9A
OP22115 21 152115
OP3140E 140E140E
OP41711 17 111711
OP5 252 FC 252 FC 252 FC
OP6271B 271B271B
OP7303 303303
23PF9956/12 26PF9956/12
Option
Byte
Total Dec Values Total Hex Values Total Dec Values Total Hex Values
OP1 154 9A 154 9A
OP2 21 15 21 15
OP3 14 0E 14 0E
OP4 17 11 17 11
OP5 252 FC 252 FC
OP6 27 1B 27 1B
OP7 3 03 3 03

Philips LC4.2E Specifications

General

Brand	Philips
Model	LC4.2E
Category	TV
Language	English