Mechanical Instructions
EN 17LC7.1HE LA 4.
4.3.12 LCD Panel 32" models
1. Remove the rear cover, as described earlier.
2. Refer to figures “LCD panel (32" models)” below.
3. Unplug the connectors from the SSB [a].
4. Unplug the outer connectors [b] from the loudspeakers.
5. Unplug the connector from the LED & IR board [c].
6. Do NOT forget to unplug the LVDS connector [d] from the
SSB. Important: Be careful, as this is a very fragile
connector!
7. Remove screws [1] that hold the mid-range speakers and
remove those.
8. Remove screws [2] that hold the central sub-frame.
9. Remove LCD panel fixation screws [3].
10. Lift the complete central sub-frame from the set (incl. the
i-Board and wiring).
11. Lift the LCD panel from the front cabinet.
Figure 4-19 LCD panel (32" models)
b
b
d
G_17150_118.eps
160807
a
c
3
2
2
1
1
1 1
To Next Page
Loading...
