Philips LC7.1HE LA - Page 18

Mechanical Instructions
EN 18 LC7.1HE LA4.
4.3.13 LCD Panel 42" model
1. Remove the rear cover, as described earlier.
2. Refer to figures “LCD panel (42" model)” below.
3. Unplug the connector from the LED & IR board [a].
4. Unplug the connectors from the SSB [b].
5. Unplug the connectors from the Speakers [c].
6. Do NOT forget to unplug the LVDS connector [d] from the
SSB. Important: Be careful, as this is a very fragile
connector!
7. Remove screws [1] that hold the support bars and remove
those.
8. Remove screws [2] from the speaker frames and remove
those.
9. Remove central sub-frame fixation screws [3].
10. Remove LCD panel fixation screws [4].
11. Lift the complete central sub-frame from the set (incl. the
i-Board and wiring).
12. Lift the LCD panel from the front cabinet.
Figure 4-20 LCD panel (42" model) [1/2]
Figure 4-21 LCD panel (42" model) [2/2]
G_17150_114.eps
140807
1
1
2
1
2
1
a
b
c
c
d
G_17150_119.eps
160807
4
3
4
3
4
4
d