Philips LCD TV - 4 Setup the TV; Picture and Sound Settings Assistant; Smart Picture and More Picture Settings

EN 24
4 Setup the TV
Change picture and sound
settings
Settings assistant
NonPubli sh
Use the settings assistant to guide you
through the picture and sound settings.
1. While watching TV, press
.
2. Select [Setup] > [Quick picture and
sound settings], then press OK.
3. Select [Start], then press OK.
Follow the on-screen instructions to choose
your preferred settings.
Smart picture settings
Use the [Smart picture] experience bar to
access frequently-used picture settings.
1. While watching TV, press
.
2. Select [Smart picture], then select one of
the following settings:
• [Personal]: Sets the TV to your
personal preferences set in the
[Picture] menus in [Setup].
• [Vivid]: Rich and dynamic settings, ideal
for daylight use.
• [Natural]: A natural picture setting.
• [Cinema]: Ideal settings for watching
movies.
• [Game]: Ideal settings for gaming.
• [Energy saving]: The most energy
conscious settings.
• [Standard]: Adjusts picture settings to
suit most environments and types of
video. Factory default settings.
• [Photo]: Ideal settings for viewing
photos.
• [Custom]: Allows you to customize
and store personal picture settings.
3. Press OK to confirm your choice.
4. Press
to exit.
More picture settings
NonPubli sh
1. Press .
2. Select [Setup] > [TV settings] >
[Picture], then press OK.
3. Select a setting to adjust:
• [Smart picture]: Accesses pre-defined
smart picture settings.
• [Reset]: Resets to factory default
settings.
• [Contrast]: Adjusts the intensity of
bright areas, keeping dark areas
unchanged.
• [Brightness]: Adjusts the intensity and
details of dark areas.
• [Colour]: Adjusts color saturation.
• [Hue]: Compensates color variations in
NTSC encoded transmissions.
• [Sharpness]: Adjusts sharpness in the
image.
• [Noise reduction]: Filters and reduces
noise in an image.
• [Tint]: Adjusts the color balance in an
image.
• [Custom tint]: Customizes tint setting.
• [Pixel Precise HD] : Accesses
advanced settings, including [HD
Natural Motion], [100 Hz Clear LCD],
[Advanced sharpness], [Dynamic
contrast], [Dynamic backlight], [MPEG
artefact reduction], [Colour
enhancement], [Gamma].
• [PC mode]: Enabled by default if you
select [Computer] in the home menu.
If enabled, you can select [Picture
format] > [Unscaled] which provides
maximum detail for display of PC
content. If a PC is connected via HDMI
or VGA, this option is enabled by
default.
• [Light sensor]: Enables dynamic
adjustment of the screen display to
match lighting conditions.
• [Picture format]: Changes the picture
format.
• [Screen edges]: Changes the picture
size.
• [Picture shift]: Adjusts the position of
the picture.