Philips LCD TV - Change Language Settings; Setup Network

EN 28
Change language settings
Audio, subtitle, teletext languages
Digital TV channels may stream several
audio, subtitle and teletext languages with a
broadcast. Set preferred languages when
multiple languages are available. This feature
is available on certain models only.
1. Press
.
2. Select [Setup] > [Channel settings] >
[Language].
3. Select one of the following settings, then
press OK:
• [Primary audio] / [Secondary audio]:
Selects the available audio language for
digital channels.
• [Primary subtitles] / [Secondary
subtitles]: Selects the available subtitle
language for digital channels.
• [Primary Text] / [Secondary Text]:
Selects the available teletext for digital
channels.
• [Hearing impaired]: Enables or disables
hearing impaired subtitles.
• [Visually impaired] (UK only): Selects
the device for audio output.
• [Volume - Visually impaired] (UK only):
Adjusts the volume of the visually
impaired audio.
• [Preferred audio format]: Select
[Standard] to receive standard audio
format (MPEG). Select [Advanced] to
receive advanced audio formats (AAC,
EAC-3 or AC-3 if available).
• [Mono/Stereo]: Select [Mono] or
[Stereo] if stereo broadcasting is
available.
4. Press
to exit.
Tip: Set a secondary language in the same
menu. You receive this language if the
primary language is unavailable.
Menu language
NonPubli sh
1. While watching TV, press .
2. Select [Setup] > [TV settings] >
[Preferences] > [Menu language].
3. Select a menu language from the list, then
press OK.
Setup network
Benefits
PC network
*This feature is available on certain models
only.
If the TV is connected to your PC network,
you can play photos, music and movies from
a computer or storage device in that
network.
Once the network is installed, select
[Browse PC] in the home menu to view PC
content.
What you need
WARNING
This TV complies with the EMC directive
only when you use a shielded Cat5 ethernet
cable.
To connect the router to your TV, we
strongly recommend that you use an
ethernet cable which is shorter than 3
meters.
To connect the TV to a PC network and
internet, you need a router in your PC
network. Set the router to DHCP On.
Connect the router to the TV with a
network (Ethernet) cable.
You can also connect this TV to a PC
network via an optional wireless USB
adaptor. Check with your local retailer for
purchase details.