Enable or disable EasyLink Remote Control
NonPubli sh
Caution: This is an advanced setting. Verify
that all connected HDMI-CEC compliant
devices support this setting. Devices that do
not support this setting will not respond to
commands from the TV remote control.
1. Press
.
2. Select [Setup] > [TV settings] >
[EasyLink] > [EasyLink Remote Control] >
[On] or [Off].
3. Press OK to activate.
Notes:
• If you cannot exit from the connected
device's menu, press .
• To switch back to TV control, press
and select [Watch TV].
• To control another device, press
and select the device from the home
menu.
• A summary of EasyLink buttons you can
use with the TV remote control is
available at Connect the TV > Use
Philips EasyLink > EasyLink buttons
(Page 45).
EasyLink buttons
NonPubli sh
Control HDMI-CEC compliant devices with
the following buttons on the TV remote
control.
• OK: Starts, pauses or resumes playback
on the connected device. Also activates
a selection or accesses the menu of the
device.
•
(Previous) / (Next): Searches
backwards and forwards on the
connected device.
• Numeric buttons: When EasyLink is
enabled, selects a title, chapter or track.
• (Options): Displays the menu of the
connected device. When
is pressed,
the TV menu is displayed.
•
(Standby): Press to enable one-touch
standby. This switches the TV and the
connected device to standby.
Other EasyLink buttons are available via
On-Screen Remote Control (OSRC).
To access the OSRC
1. While watching a connected device, press
.
2. Select [Show remote control], then press
OK.
3. Use the Navigation buttons and OK to
select and use an on-screen button.
4. Press
to exit.
Configure TV speakers
NonPubli sh
You usually connect the TV to a HDMI-CEC
compliant device such as a HTS using both a
HDMI cable for video and a digital audio
cable for audio. You can output TV audio
through the HDMI cable solely, provided
both the TV and device are HDMI ARC
compliant (see Connect the TV > Use
Philips EasyLink > Use HDMI ARC).
Configure TV speakers
1. Press
.
2. Select [Setup] > [TV settings] >
[EasyLink] > [TV speakers].
3. Select one of the following options, then
press OK:
• [Off]: Turn off TV speakers.
• [On]: Turn on TV speakers.
• [EasyLink]: TV audio continues to be
streamed through the TV speakers.
Switch the TV audio to the connected
HDMI-CEC audio device through the
experience menu.
• [EasyLink autostart]: Turn off TV
speakers automatically and streams TV
audio to the connected HDMI-CEC
audio device.
Switch TV audio in experience menu
If [EasyLink] or [EasyLink autostart] are
selected, access the experience menu to
switch the TV audio.
1. While watching TV, press
.
2. Select [Speakers], then press OK.
3. Select one of the following, then press
OK:
• [TV]: On by default. Streams TV audio
through TV speakers until the
connected HDMI-CEC audio device
switches to system audio control.
Thereafter, TV audio is streamed
through the connected device.
To Next Page
Loading...
