15 May 03, 2004
Philips Semiconductors Preliminary User Manual
LPC2119/2129/2194/2292/2294ARM-based Microcontroller
• IOPIN0 and IOPIN1 tyopografic errors corrected in "System Control Block" chapter
• PINSEL2 added to to "Introduction" chapter
• T0IR, T0CCR, T0TCR, T1TCR, T0EMR and PCONP updated in "Introduction" chapter
• EXTMODE and EXTPOLAR registers added in "Introduction" chapter and updated in "System Control Block" chapter
• Power Control Usage Notes for reducing the total power added to "System Control Block" chapter
• PINSEL2 register as well as booting procedure updated in "Pin Connect Block" and "Watchdog" chapters
• references to the pclk in "External Memory Controller (EMC)" chapter corrected to the cclk
• LPC2292/2294 PINSEL2 table in "Pin Connect Block" chapter corrected
• A/D pin description in "A/D Converter" chapter rephrased
• Information on Spurious Interrupts added into "Vectored Interrupt Controller (VIC)" chapter
• Details on the checksum generation in case of Read Memory and Write to RAM ISP commands added in "Flash Memory
System and Programming" chapter
To Next Page