
Do you have a question about the Philips LX600 and is the answer not in the manual?
| D/A converter | 24 bit, 96 kHz |
|---|---|
| Frequency response | 30-20000 Hz |
| Signal to noise ratio | > 60 db (CCIR) |
| Output power (RMS) | 6 x 100W |
| Number of Preset Channels | 40 |
|---|---|
| Tuner Bands | FM Stereo, MW |
| Power supply | 200-240 V, 50Hz |
|---|---|
| Standby power consumption | < 1 W |
Lists audio modes like Rock, Jazz, Drama, and playback formats such as Dolby Digital.
Details FM/MW digital tuning, RDS station naming, and 40 presets.
Specifies amplifier output as 6 x 100 watts RMS and 600 watts total power.
Describes satellite, center, and subwoofer speaker specs, including frequency range and impedance.
Lists analog and digital audio input/output ports, headphone jack, and antenna connectors.
Covers Audio DAC, Signal to Noise ratio, and frequency response for audio quality.
Details power requirements (voltage, frequency) and low standby power consumption.
Includes FTD, 3-step Dim mode, and 45-key remote control.
Explains the benefits of SACD format for ultra-high quality music reproduction and surround sound.
Defines Class D amplifier technology for converting low-level audio to high-power digital output.
Describes Dolby Pro Logic II's ability to provide surround sound from stereo sources.
Explains the tweeter's lightweight membrane for crisp highs and balanced sound perception.
Loading...