Philips LX7000SA - Remote Control

8
English
Notes for remote control:
1 First select the source you wish to control by
pressing one of the source select keys on the
remote control (for example DISC, TUNER).
2 Then select the desired function (for example É,
S , T).
FUNCTIONAL OVERVIEW
9
^
&
*
3
2
4
!
@
(
)
*
(£
¡
™
(≤
(∞
(§
(2
($
(•
(ª
≥
Remote Control
^ DISC MENU (in Disc mode only)
– to enter or exit the Disc menu.
– to switch on/off Playback Control (PBC) mode while
playback stopped.
– to return to the PBC menu during playback.
& SYSTEM MENU (in Disc mode only)
– to enter or exit the system menu bar.
* 3 4 1 2
– in Tuner mode, to select a preset radio station
number (1 or 2 ).
– to select movement direction in the disc menu /
system menu bar.
( REPEAT
– to repeat chapter, track, album, title or disc.
) REPEAT A-B
– to repeat a specific section on a disc.
¡ SUBW +/-
– to adjust the subwoofer’s volume level.
REAR +/-
– to adjust the rear (surround) speakers’ volume level.
CENTER +/-
– to adjust the center speaker’s volume level.
TV VOL +/-
– to adjust Philips television’s volume level.
™ SLEEP
– to set the sleep (auto-off) timer function.
£ DIM
– to select a different brightness for the display screen.
≤ VOICE
– to enhance the surround and dialog in multichannel
mode.
∞ MUTE
– to enable or disable the sound output.
§ RESUME
– to continue disc playback after an interruption.
≥ OK
– to exit or confirm the menu selection.
• Numeric Keypad (0-9)
– in Disc mode, to enter a track/chapter number.
– in Tuner mode, to enter a preset radio station.
– in TV/AV mode, to enter a TV channel number.
ª y
– press to switch the system to standby mode.
– hold down to switch the system to Eco Power
standby mode.