Basic Operations
Switching on/off
@ PressCD,TUNER, AUX or
USB PC LINK.
Setting the clock
The clock can be set in erther 12ohour or
24 hour mode (_I ISg PM"or "H3:59" for
example),
@ Press O.
ECO POWER bu_ton lights up.
The d splay screen will go blank
@ Press and hold @.
The clock is displayed.
Whle in standby mode, pressing
CLOCK'TINER button wll switch the system to
Eco Power standby mode.
Note:
Before sw¢ching the system ru Eco Puwer
standby or standby mode, make sure the
demonstration mode has been deactivated¸
Demonstration mode
Ifthe demonstration mode isact ve,whenever
you swtch the system to EcoPower standby or
standby mode, it will begin showing the various
features ofl_red by the system,
To activate the demonstration
@ In Eco Power standby/standby mode,
press and hold • on the main unit until
To deactivate the demonstration
@ Press and hold • on the main unit until
@ Press and hold CLOCK on the i_mote until
the time flashing on the displa_
OR
Press and hold CLOCK.TIMER on the
main unit until'S£LECT ELS£_: Or,
CLOCK-TIMER again to confirm.
Press PROGRAM (PROG) repeatedly to
change between 12-hour and 24-hour clock
mode.
@ Press _ or IH_ _peatedly 1o set the houri
@ Press I< or _l i_peatediy to set the minute.
@ Press CLOCK (or CLOCK.TIMER) to
store the se_ing.
The clock will start working.
Notes:
The cbck sutting will be erased when the syst_¢n
is dsconnected trom [he power suppl_
The system w#l exit dock setdng mode if no
button _ pressed wchin 90 second_
16
3139 115 22181
To Next Page
Loading...
