17
English
EN
[Night Mode]
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
Preference setup
1 Press button.
2 Select to access the setup menu.
3 Select to access the
[Preference]
options.
[Audio]
: Select an audio language for video.
[Subtitle]: Select a subtitle language for
video.
[Disc Menu]: Select a menu language for a
video disc.
[Parental Control]: Set the rating level
to a disc. Restrict access to discs that are
encoded with ratings These discs must be
recorded with rating levels.
[PBC]:Display or skip the content menu
for VCD and SVCD.
[Password]: Set or change a password to
play a restricted disc.
[DivX Subtitle]:Select the language of the
DivX.
[Version Info]:Display the software version.
[Default]:Reset the home theater to the
default settings programmed at the factory.
Note
the movie is ‘Movie.avi’, then you need to name the text
8 Other features
Set the timer
This unit can be used as a timer. The disc/tuner/
USB is activated to play at a preset time.
Note
Make sure that you have set the clock correctly.
1 In standby mode, press and hold TIMER/
SLEEP until [TIMER SET] (timer set) scrolls
on the display.
» "*;<;(=*&>(;)
scrolls on the display.
2 Press DISC, or USB, or TUNER to select
a source.
3 Press TIMER/SLEEP
» The clock digits are displayed and
begin to blink.
4 Press / or VOL -/+ to set hour, then
press TIMER/SLEEP
» The minute digits are displayed and
begin to blink.
5 Press / or VOL -/+ to set minute,
then press TIMER/SLEEP
» [VOL] (volume) is displayed and begins
to blink.
6 Press / or VOL -/+ to adjust volume,
then press TIMER/SLEEP
» The timer is set and activated, and
is
displayed.
Tip
Minimum volume and maximum volume can be set,
volume 1 to volume 31 can be adjusted.
MCD1060_93_UM_V1.0.indb 17 2012-3-22 16:54:59
To Next Page
Loading...
