EasyManua.ls Logo

Philips MCD1060 - Page 23

Philips MCD1060
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22 EN
The aspect ratio of the TV screen cannot be
changed even though you have set the TV
display format.
@

DVD disc.
@
The aspect ratio may not be changed for
some TV systems.
No sound
@
Adjust the volume.
No response from the unit
@
Disconnect and reconnect the AC power
plug, then turn on the unit again.
Remote control does not work
@ 
select the correct source with the remote
control instead of the main unit.
@ Reduce the distance between the remote
control and the unit.
@ Insert the battery with its polarities (+/–
signs) aligned as indicated.
@ Replace the batteries.
@ Aim the remote control directly at the
sensor on the front of the unit.
No disc detected
@ Insert a disc.
@ Check if the disc is inserted with the print
side facing inward.
@ Wait until the moisture condensation at
the lens has cleared.
@ Replace or clean the disc.
@ 
#$
@ 
complete.
@ 
@ Due to Digital Rights issue, the DRM-

through an analog video connection (e.g.
composite, component and scart). Transfer
the video content onto the Disc Media

Audio or subtitle languages cannot be set
@
The disc is not recorded with sound or
subtitles in multiple languages.
@
The audio or subtitle language setting is
prohibited on the disc.
(>*Q
@

device has exceeded a certain limit. This
phenomenon is not a malfunction.
@

supported.
USB device not supported
@
The USB device is incompatible with the
unit. Try another one.
Poor radio reception
@ Increase the distance between the unit and
your TV or VCR.
@ Fully extend and adjust the FM antenna.
Timer does not work
@ Set the clock correctly.
@ Switch on the timer.
Clock/timer setting erased
@ Power has been interrupted or the power
cord has been disconnected.
@ Reset the clock/timer.
MCD1060_93_UM_V1.0.indb 22 2012-3-22 16:55:01

Related product manuals