25
Set RDS clock
You can use time signal broadcast together
with the RDS signal to set the clock of the unit
automatically.
1 Tune to a RDS radio station that transmits
time signals.
The unit reads the RDS time and sets »
the clock automatically.
Note
The accuracy of the transmitted time depends on the •
RDS station that transmits the time signal.
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to a RDS station, a RDS
icon and the station name are displayed.
When automatic programming is used, RDS
stations are programmed fi rst.
1 Tune to a RDS station.
2 Press DISPLAY/RDS repeatedly to scroll
through the following information (if
available):
Station name»
Program type such as » [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
Frequency»
Note
• There are defi nitions of RDS program types (see ‘RDS
program types’ on page 31).
English
EN
To Next Page
Loading...
