Philips MCD170/98 - Set Clock; Turn on; Set up the TV; Switch to Standby

15
Switch to standby
1 Press to switch the DVD Micro
Theater to standby mode.
The backlight on the display panel is »
reduced.
The clock (if set) appears on the »
display panel.
Set clock
1 Press and hold CLOCK/DISPLAY to
activate the clock setting mode.
The 12 hour or 24 hour format is »
displayed.
2 Press PROG repeatedly to select 12 hour
or 24 hour format.
3 Press CLOCK/DISPLAY to confi rm.
The hour digits are displayed and begin »
to blink.
4 Press / to set the hour.
5 Press CLOCK/DISPLAY to confi rm.
The minute digits are displayed and »
begin to blink.
6 Press / to set the minute.
7 Press CLOCK/DISPLAY to confi rm.
Tip
To view the clock during play, press • CLOCK/
DISPLAY repeatedly until the clock is displayed.
Turn on
1 Press .
Set up the TV
1 Turn on the DVD Micro Theater.
2 Press DISC to select DISC source.
3 Turn on the TV and then select the
correct video-in channel.
You should see the blue Philips DVD »
background screen.
Tip
See the TV user manual for details of how to select •
the correct video-in channel.
English
EN
MCD170_98_Eng.indd Sec1:15MCD170_98_Eng.indd Sec1:15 12/18/2008 2:27:42 PM12/18/2008 2:27:42 PM