Philips MCD170/98 - Page 26

27
Enable night mode
[ NIGHT MODE]
Makes loud sound level softer and soft sound
level louder so that you can watch the DVD
movies at a low volume, without disturbing
others.
1 Press SYSTEM MENU .
2 Select [AUDIO SETUP] (audio
setup)>[ NIGHT MODE] (night mode),
and then press
.
3 Select an option and then press OK .
• [ON] (on)
Enjoy quiet viewing at night.
• [OFF] (off )
Enjoy surround sound with its full
dynamic range.
4 Press SYSTEM MENU to exit.
Select sampling rate
You can select the Linear Pulse Code
Modulation (LPCM) output sampling rate. The
higher the sampling rate, the better the sound
quality.
1 Press SYSTEM MENU .
2 Select [AUDIO SETUP] (audio
setup)>[ LPCM] , and then press
.
3 Select an option and then press OK .
[ • 48K]
For discs recorded at sampling rate
of 48kHz.
[ • 96K]
For discs recorded at sampling rate
of 96 kHz.
[ • 192K]
For discs recorded at sampling rate
of 192 kHz.
4 Press SYSTEM MENU to exit.
English
EN
MCD170_98_Eng.indd Sec1:27MCD170_98_Eng.indd Sec1:27 12/18/2008 2:27:51 PM12/18/2008 2:27:51 PM