3 - 3
CONNECTION AND CONTROLS
Using the VCR for recording DVDs
CONNECT TO SUB WOOFER
R
L
SPEAKERS 6
Ω
Y/Pb/Pr OUT
A/V OUT
A
UDIO IN
L
R
VIDEO IN
VCR
1 Connect the end of the supplied AV cord with
only one connector to the A/V OUT jack of
the DVD system.
2 For the other end, connect the video output
connector (yellow) to the VIDEO IN jack on the
VCR and the audio connectors (white/ red) to
the corresponding audio input jacks on the VCR.
This will allow you to make analogue stereo
(two channel, right and left) recordings.
Connecting a USB device or memory
card
IMPORTANT!
– Before connecting the USB plug, first
slide open the protective cover on the
socket.
By connecting a USB mass storage device
(including USB flash memory, USB flash players
or memory cards) to the Hi-Fi system, you can
enjoy the device's stored music through the
powerful speakers of Hi-Fi system.
●
Insert the USB device's USB plug into the
socket on the set.
f
or the devices with USB cables:
1 Insert one plug of the USB cable (not supplied)
to the socket on the set.
2 Insert the other plug of the USB cable to the
USB output terminal of the USB device.
for the memory card:
1 Insert the memory card into a card reader (not
supplied).
2 Use a USB cable (not supplied) to connect the
card reader into the socket on the set.
1
7
3
9
6
@
!
7
9
#
7
2
5
7
9
4
0
8
9
1
&
(
5
0
%
@
*
2
3
$
7
9
)
4
(
8
8
6
#
≤
!
¡
∞
§
^
£
≥
™
7
Controls
To Next Page
Loading...
