Philips MCD395/12 - System Control Interface; Controls on the Main Unit; Controls on the Remote Control

17
English
Controls
Controls on the system
1 iR sensor
– infrared sensor for remote control.
2 ECO POWER/STANDBY-ON y
– switches the system on or to Eco power/normal
standby mode.
3 CLOCK
Standby mode
– sets the system clock.
Playback mode
– displays clock.
4 OPEN•CLOSE 0
– to open or close the disc door.
5 Mode Selection
9 ............................. In DISC/USB mode, to stop
playback or clear a program.
2; ........................... In DISC/USB mode, to start or
interrupt playback.
PRESETí/ë
................................. Disc/USB: skips to the previous/
next chapter/title/track.
................................. Tuner : selects a preset radio
station.
TUNING 22/33
Tuner
– press to tune to a lower/higher radio frequency
gradually.
– press and hold, then release the key to start
automatic search for a radio frequency
downward/upward.
Disc/USB
– searches fast backward/forward in a disc/USB.
6 n
– to connect a headphone.
7 USB port
– jack for the external USB mass storage device
8 LINE-IN jack
– to connect an auxiliary device.
9 VOL
– adjusts the volume upward/downward.
– adjusts the hours and minutes in clock/timer
setting mode.
0 DSC
– selects different types of preset sound equalizer
settings (CLASSIC, JAZZ, POP or ROCK).
! LOUDNESS/DBB
– enables or disables automatic loudness
adjustment.
– enables or disables bass enhancement.
@ SOURCE
– to select the respective sound source : DISC
TUNER, USB or AUX.
# Display screen
– to view the current status of the system.
Controls on the remote control
1 y
– to switch to the system to standby mode.
2 Numeric Keypad (0-9)
– inputs a track/title/chapter number of the disc.
3 PROG/ANGLE
–DVD/VCD/CD/MP3-CD/USB: enters the
program menu.
– Picture CD: during playback, to select a slide
show mode.
–Tuner: programs preset radio stations.
–DVD: selects a DVD camera angle.
4 SOURCE
– to select the respective sound source : DISC
TUNER, USB or AUX.
5 SYSTEM MENU (disc mode only)
– to enter or exit the system menu bar.
pg001-pg041_MCD395-Eng 2010.4.2, 12:4717