English
9
AUDIO
IN
S-VIDEO
IN
VIDEO IN
TV IN
AUDIO
IN
S-VIDEO
IN
VIDEO IN
TV IN
IMPORTANT!
– The type plate is located at the
bottom of the system.
– The voltage selector located at the
bottom of this system is preset at
220V-240V from the factory. For
countries that operate at 110V-127V,
please adjust to 110V-127V before you
switch on the system.
– Before connecting the AC power cord
to the wall outlet, ensure that all
other connections have been made.
–Never make or change any
connections with the power on.
–To connect a cable to the
corresponding jack on the rear panel,
make sure to lead it through the square
hole of the stand.
–A separate power switch is provided
on the back of the subwoofer. Please
switch it on after completing all
connections in order to enjoy 2.1-channel
sound output.
Connections
Step 1: Connecting the
subwoofer
● Connect the subwoofer to the main unit with
the supplied system cable (grey).
Step 2: Placing the speakers
Front
speaker
( left )
Front
speaker
( right )
VIEWING AREA
Speaker
(right)
Speaker
(left)
FM antenna
AC power
AC power
Subwoofer
pg 001-021_MCD988_Eng-98 2007.6.26, 15:269
To Next Page
Loading...
