Philips MCM330 - 4 Play; Play Disc; Play from USB or SD;MMC; Play from an External Device

11
3 Press ALBUM +/- to select a folder.
4 Press / WRVHOHFWDQDXGLRÀOH
5 If the disc doesn’t play, press .
To pause/resume play, press 
.
To stop play, press
.
7RVHDUFKZLWKLQDQDXGLRÀOHSUHVV
and hold
/ , then release to
resume normal play.
Play from an external device
You can also listen to an external audio device
through this unit.
1 Press MP3 LINK to select the MP3 link
source.
2 Connect the supplied MP3 link cable to:
the  MP3 LINK jack (3.5mm) on the
unit.
the headphone jack on an external 
device.
3 Start to play the device (see the device
user manual).
5 Play options
Repeat play
1
During play, press REPEAT repeatedly to
select:
[REP] (repeat): the current track is 
played repeatedly.
[REP ALL] (repeat all): all tracks are 
played repeatedly.
2 To return to normal play, press REPEAT
repeatedly until repeat mode is no longer
displayed.
Random play
1
Press SHUFFLE.
>6+8)@VKXIÁHDOOWUDFNVDUHSOD\HG»
randomly.
4 Play
Play disc
1
Press CD to select the disc source.
2 Press OPEN/CLOSE to open the disc
compartment.
3 Insert a disc with the printed side facing
outward, then press OPEN/CLOSE to
close the disc compartment.
4 If the disc doesn’t play, press .
To pause/resume play, press 
.
To stop play, press
.
To select another track, press 
/ or
press a numeric button.
To select an album, press  ALBUM
+/-.
To search within a track, press and 
hold
/ , then release to resume
normal play.
Play from USB or SD/MMC
Note
 Ensure that the USB device contains playable
audio contents for supported formats. (see
‘USB playability information’ on page 15)
1 Insert the USB plug of the device into the
socket, or the SD/MMC card into the
SD/MMC socket.
2 Press USB/SD to select the USB source,
or the SD source.
English
EN