Philips MCM330 - Program Tracks; 6 Adjust Sound; Adjust Volume Level; Mute Sound

12
Select a preset sound effect
1
During play, press DSC repeatedly to
select:
[POP] (pop)
[JAZZ] (jazz)
[CLASSIC] (classic)
[ROCK] (rock)
Enhance bass
1
During play, press DBB to turn or or off
dynamic bass enhancement.
If DBB is activated, DBB is displayed.»
Immerse music over a wider
spot
1
During play, press LIVING SOUND on
the remote control to turn on or off the
sound effect.
If Living Sound is activated, »
is
displayed.
Listen through headphone
1
Plug a headphone into the on the top
of the unit.
7 Listen to radio
Tune to a radio station
1
Press TUNER to select FM.
2 Press and hold / for more than 2
seconds.
[SEARCH] (search) is displayed.»
The radio tunes to a station with »
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station, press 
/ UHSHDWHGO\XQWLO\RXÀQGRSWLPDO
reception.
2 To return to normal play, press SHUFFLE
again.
Tip
7KHUHSHDWDQGVKXIÁHIXQFWLRQVFDQQRWEH
activated at the same time.
6KXIÁHSOD\FDQQRWEHVHOHFWHGZKHQ\RXSOD\

programmed tracks.
Program tracks
You can program a maximum of 40 tracks.
1 At CD/USB/SD mode, in the stop
position, press PROG to activate the
program mode.
[PROG] (program) is displayed.»
2 For MP3/WMA tracks, press ALBUM +/-
to select an album.
3 Press / to select a track, then press
PROGWRFRQÀUP
4 Repeat steps 2 to 3 to select and store all
tracks to program.
5 Press to play the programmed tracks.
During play, [PROG] (program) is »
displayed.
To erase the program, in the stop 
position, press
.
6 Adjust sound
Adjust volume level
1
During play, press VOL +/- to increase/
decrease the volume level.
Mute sound
1
During play, press MUTE to mute/unmute
sound.
EN