English
19
Synchro start CD recording
1 Select CD source.
● Press TUNING S/T (S/T on the
remote control) to select the desired track to
start recording.
● You can programme the tracks in the order you
want them to be recorded (refer to “CD/MP3-
CD Operations - Programming the disc tracks”).
2 Press REC on the remote control to start
recording.
➜ Playing of the CD programme starts
automatically from the beginning of the CD. It is
not necessary to start the CD player separately.
One touch recording
1 Select CD, TUNER or AUX source.
2 If necessary, start playback of the selected
source.
3 Press REC to start recording.
Recording timer
To record from the radio, you will need to use a
preset radio station and to set a start (ON) and
finish (OFF) time.
1 Select the preset radio station to record from
(refer to “Radio Reception - Tuning to preset
radio stations”).
2 In standby mode, press TIMER on the remote
control for more than two seconds.
➜ The current selected source is displayed.
3 Press SOURCE repeatedly until “REC TUN”
source is displayed.
4 Press TIMER to confirm the source.
➜ “SET ON TIME” is displayed and the clock
digits for the hours flash.
5 Adjust VOLUME on the front pannel to set the
hours.
6 Press TIMER again.
➜ The clock digits for the minutes flash.
7 Adjust VOLUME on the front pannel to set the
minutes.
8 Press TIMER to confirm the recording star t
time.
➜ “SET OFF TIME” is displayed and the clock
digits for the hours flash.
9 Repeat steps 5-7 to set the finish time.
0 Press TIMER to confirm the timer settings.
➜ is shown and the recording timer is now
set.
Note:
– The recording timer will not be activated if the
system is in tape play mode.
ORIGINAL COPYRIGHT NOTICE
The making of unauthorized copies of copy-
protected material, including computer
programmes, files, broadcasts and sound
recordings, may be an infringement of copyrights
and constitute a criminal offence. This equipment
should not be used for such purposes.
Ta pe Operation/Recording
pg 001-024_MCM726_22_Eng 3/20/07, 5:55 AM19