English
23
Tuner
Clock setting via RDS
Some RDS radio station may be transmitting a
real clock time at an interval of every minute. It
is possible to set the clock by using a time signal
which is broadcast together with the RDS signal.
1 Tune to the desired RDS radio station on the
FM waveband (see Tuning to radio stations)
2 Press CLOCK twice
3 Press RDS/NEWS
➜ "SEARCH RDS TIME" appears
➜ When RDS time is read, the current time will
be stored
➜ If the RDS station does not transmit RDS
time within 90 seconds, "NO RDS TIME"
appears
Helpful hints:
– The time signal broadcast from certain RDS
stations may not always be accurate..
CD TUNER
REPEAT PROGRAM
TAPE A /B DISPLAY/CLOCK
SHUFFLE
TAPE AUX
STANDBY
VOL
NEWS
While listening to CD, USB, TAPE or AUX
source, you can activate NEWS. The set will
tune to the news/traffic announcement if the
related signals are received from a RDS station.
Activating the NEWS function
● During playback in CD, USB, TAPE or AUX
source, press RDS/NEWS until "NEWS"
appears
➜ Playback continues when the set scans for
RDS news
➜ When news transmission is detected, the set
will switch to the news station. "NEWS" starts
flashing
Helpful hints:
– Make sure you have stored RDS stations in the
first 5 preset locations (See Programming radio
stations).
– If no news transmission is detected during the
set’s scanning, "NO RDS NEWS" appears.
Deactivating NEWS function
● Press RDS/NEWS again
or
● Switch the set to TUNER source
STANDBY
-
ON
ECO POWER
TA PE RECORDUSB RECORD OPEN / CLOSERD S/NEWS
WMA
-
MP3
-
CD/CD
-
R/CD
-
RW C O MPATIBLE
001-033_MCM760_12_Eng 3/29/06, 12:48 PM23
To Next Page
Loading...
