17
2 Press / to select a track number
to program, then press PROGRAM to
confi rm.
To select a track in an MP3 disc or
USB device, fi rst press ALBUM +/- to
select the album where the track is
located.
[P-X] is displayed, where “X” is the
next position in the program.
3 Repeat steps 2 to 3 to select and store all
tracks to program.
4 Press PROGRAM to complete.
[PROG] (program) is displayed.
5 Press to play the programmed tracks.
To erase the program, press
PROGRAM .
Scan all tracks
1
Press INTRO to play the fi rst 10 seconds
of each track one by one.
To stop scan, press INTRO again.
•
•
»
•
•
English
EN
417576_indesign.xml.indd Sec1:17417576_indesign.xml.indd Sec1:17 2008-07-29 10:57:312008-07-29 10:57:31
To Next Page
Loading...
