19
Program radio stations
manually
Note
You can program a maximum of 20 preset radio
stations.
•
1 Tune to a radio station.
2 Press PROGRAM to activate programming.
3 Press / to allocate a number from
1 to 20 to this radio station, then press
PROGRAM to confi rm.
The preset number and the frequency
of the preset station are displayed.
4 Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store another
station in its place.
•
Tune to a preset radio station
1
Press / to select a preset number
that you want.
Tip
You can also use the numerical keypad to select a
preset station directly.
To enter a 2 or 3-digit number, press SHIFT , then enter
the number.
•
•
Show RDS information
RDS (Radio Data System) is a service
that allows FM stations to show additional
information. If you tune to a RDS station, a RDS
icon and the station name are displayed.
»
7 Tune to FM
radio stations
1 Ensure that you have connected and fully
extended the supplied FM antenna.
2 Press FM .
3 Press and hold / .
4 When [SEARCH] (search) is displayed,
release the button.
The FM tuner tunes to a station with
strong reception automatically.
5 Repeat steps 3-4 to tune to more stations.
To tune to a weak station:
Press
/ repeatedly until you fi nd optimal
reception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset radio
stations.
•
1 Press / to select a preset number to
start programing.
2 Press and hold / for 2 seconds to
activate automatic programming.
[AUTO] (auto) appears.
All available stations are programmed
in the order of waveband reception
strength.
The last programed radio station is
played automatically.
»
»
»
»
English
EN
417576_indesign.xml.indd Sec1:19417576_indesign.xml.indd Sec1:19 2008-07-29 10:57:322008-07-29 10:57:32
To Next Page
Loading...
