Philips MCM772 - 9 Product Information; Specifi Cations; Amplifi er; Disc

22
Speakers
Speaker Impedance 4ohm
Speaker Driver 4” woofer + 1” tweeter
Sensitivity >82dB/m/W
General information
AC power 220 - 230V, 50Hz
Operation Power
Consumption
50W
Standby Power
Consumption
<4W
Eco Standby Power
Consumption
<1W
Audio Ouput 1Vpp ± 0.1Vpp
3.5kohm
Headphone output 2X15mW 32ohm
USB Direct Version 2.0
Dimensions
- Main Unit (W x H x D)
- Speaker Box (W x H
x D)
160 x 150 x
280mm
140 x 210 x
250mm
Weight
- With Packing
- Main Unit
- Speaker Box
10 kg
3 kg
2 x 2.5 kg
USB playability information
Compatible USB devices:
USB fl ash memory (USB 2.0 or
USB1.1)
USB fl ash players (USB 2.0 or USB1.1)
memory cards (requires an additional
card reader to work with this audio
system)
Supported formats:
USB or memory fi le format FAT12,
FAT16, FAT32 (sector size: 512 bytes)
MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
•
•
•
•
•
9 Product
information
Note
Product information is subject to change without prior
notice.
•
Specifi cations
Amplifi er
Rated Output Power 2X50W RMS
Frequency Response 50 - 20000 Hz, ±3dB
Signal to Noise Ratio >65dB
Aux Input 0.5 V RMS 20kohm
Disc
Laser Type Semiconductor
Disc Diameter 12cm/8cm
Support Disc CD-DA, CD-R, CD-RW,
MP3-CD, WMA-CD
Audio DAC 24Bits / 44.1kHz
Total Harmonic
Distortion
<1%
Frequency Response 50-20KHz (44.1KHz)
S/N Ratio >65dBA
Tuner (FM)
Tuning Range 87.5 - 108MHz
Tuning grid 50KHz
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
<22 dBf
>43 dBf
Search Selectivity >28dBf
Total Harmonic Distortion <3%
Signal to Noise Ratio >55dB
EN
417576_indesign.xml.indd Sec1:22417576_indesign.xml.indd Sec1:22 2008-07-29 10:57:342008-07-29 10:57:34