EN 2 1. MCP9350i
About this Manual
1. About this Manual
1.1. Content of this Manual
Note: The MCP9350i will be serviced on a modular level only. Faulty modules will be identified and replaced. Detailed circuit
diagrams and technical information on a component level are therefore not provided in this document.
1.1.1. What is included in this Manual
• Safety Information
• System Overview
•
Basic System Block Diagrams
• Parts / Module Identification
• Module Functional Descriptions
• Basic Module Technical Descriptions
• Basic Measuring Point Information
• Basic Fault Finding Strategy
• Module Removal & Replacement Procedures
• Functionality Testing Procedures
• End Test Sequence / Checklist
• Parts List / 12NC Numbers
1.2. Additional Documentation
The following documentation is supplied by Philips and can be used for further reference.
• MCP9350i Quick Install Guide
• MCP9350i Use Cases
• RC4370 Remote Control User Manual
To Next Page
