Philips MCP9350i - Page 33

Hardware Tests
MCP9350i 11. EN 33
11.25. TV Tuner Card and Audio/Video Inputs
11.25.1. Required Equipment
•
RF TV signal source (examples: external TV antenna, cable TV, VCR)
• Composite Video signal source (examples: DVD player, camcorder)
• S-Video signal source (examples: DVD player, camcorder)
11.25.2. Test Procedure
1.
Connect the Composite Video source to the upper connector on the MCP9350i back panel.
2.
Connect the TV signal source to the TV RF-in connector.
3.
Go to the TV signal setup section in the Windows Media Center program. (Select:
Settings
>
TV
>
Set Up TV Signal
)
4. Acknowledge that the current settings will be deleted (in actuality, the procedure will be cancelled at the end so the settings will
remain).
5. Select the correct region.