Philips MCP9350i - Page 62

EN 62 12. MCP9350i
Hardware Repair
12.16.8. DIMM Re-Assembly
To re-assemble the DIMM, do all processes described in paragraph 12.16.7 in reverse order.
Note: The DIMM connectors must be populated in the correct sequence. See figure 12.16-11 for connector identification and
population sequence.
Figure 12.16-11
1
s
t
: Channel A – DIMM 0
2
n
d
: Channel B – DIMM 0
3
r
d
: Channel A – DIMM 1
4
th
: Channel B – DIMM 1