Philips MRV640 - 4.1 Dismantling and Assembly of the Set

Mechanical Instructions
EN 11DVDR615, MRV640 4.
4. Mechanical Instructions
4.1 Dismantling and Assembly of the Set
For item numbers please see the exploded views in chapter 10.
4.1.1 Front
– After removing the top cover, remove tray front 134+138,
see picture 4-1
– Remove the three screws 188
– Release the two snap hooks on the sides and remove the
front assembly
– Remove the 4 screws 186 to remove the front plate 184,
see picture 4-2
Figure 4-1
Figure 4-2
4.1.2 Digital Board
– Remove 4 screws 273
– Turn the PCB in the service position
Figure 4-3