8 EN
3 Connect
Connect FM antenna
Connect the supplied FM antenna to the FM
jack on the back of the main unit.
Connect AM antenna
1 Assemble the AM loop antenna.
2 Connect the AM loop antenna to the AM
jack on the back of the main unit. Adjust
the position of the antenna for optimal
reception.
Connect power
1 If your power supply voltage is 110V-127V,
adjust the voltage selector (locate on the
back panel of the unit) to 110V-127V.
2 Connect the AC power plug to the power
outlet.
Caution
• Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage set on the
voltage selector on the bottom of the unit.
• Before connecting to the AC power, make sure that you
have completed all other connections.
To Next Page
Loading...
