EasyManua.ls Logo

Philips NTRX500 - Circuit Diagram - Main Board (Part 2)

Philips NTRX500
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19EN
10 Other features
Mix sound
You can play from a Source A source (Disc/USB
A/Bluetooth/Tuner/Audio in A mode) and from
a Source B source (USB B/Audio in B mode) at
the same time.
1 Play from a Source A source.
• Disc - Select the Disc mode and load a
disc. Select a track and start playing.
• Tuner - Tune to a radio station.
• Audio in A - Select the Audio in A
source, and then connect and start to
play an external device.
• USB A - Select the USB A mode, and
connect a USB device to A socket.
Select a track and start playing.
• Bluetooth - Connect and play from a
Bluetooth device.
2 Play from a Source B source (Audio in B/
USB B mode).
• Audio in B - Select the Audio in B
source, and then connect and start to
play an external device.
• USB B- Select the USB B mode, and
connect a USB device to B socket.
Select a track and start playing.
3 Use the CROSS FADER ASSIGN to
adjust the left/right channel balance during
playback.
Karaoke
You can connect a microphone and sing along
with a music source.
1 Turn the MIC volume dial to the minimum
level.
2 Connect a microphone to a microphone
port MIC 1/2 on the unit.
3 Press CD, or TUNER, or USB A, or
AUDIO A, or AUX to select the source,
and start play.
4 Sing through the microphone.
• To adjust the volume of the source,
press VOL +/-.
• To adjust the volume of the
microphone, turn the MIC volume dial.
USB record
AudioCDtracks,MP3les,radio,andaudio
from external devices are recorded in .mp3
format.
ThersttimeyourecordtoaUSBdevice,
a folder is automatically created in the USB
device. Each time you record to a USB device,
therecordedlesarestoredinasubfolder
in this folder. Files and subfolders are named
numerically in the order in which they are
created.
Note
This function is only available for A socket.
Record to a USB device
1 Connect a USB device to A socket.
2 Prepare the source to record from.
• Disc - Select the disc source and load a
disc. You can select a track from which
a recording starts.
• Radio - Tune to a radio station.
• AUDIO IN/AUX - Select the Audio
in/AUX source, and then connect
and start to play an external device.
Karaoke - Singing during karaoke.
• USB B - Connect a "source" USB
device to B socket. Rotate the
Source selection dial to select the USB
Bsource,andselectanaudioleto
play.

Other manuals for Philips NTRX500

Related product manuals