Philips NTX800 - Bluetooth and External Playback; Bluetooth Playback and Disconnection; External Audio Device Playback

14 EN
4 Select [PHILIPS NTX800] displayed on
your device for pairing. If necessary, input
“0000” as the pairing password.
» After successful connection, the
Bluetooth indicator turns solid blue.
Play from Bluetooth device
After successful Bluetooth connection, play
audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to this product.
Disconnect a device
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
Note
• Before connecting another Bluetooth device, disconnect
thecurrentdevicerst.
Play from an external device
You can play audio from an external device
through the speakers of this product.
Play from an MP3 player
1 Slide CROSS FADER to the far left.
2 Press AUDIO A to select the [AUD-A]
source.
AUD-A
3 Connect an audio input cable (not
supplied)witha3.5mmconnectoron
both ends to:
• the AUDIO IN A socket on the unit,
and
• the headphone socket on the MP3
player.
4 Play audio on the MP3 player (refer to its
usermanual).
Tip
• If the MP3 player is connected to the AUDIO IN B
socket, rotate the source selector on the main unit to
select the [AUD-B] source.
Play from other audio device
You can connect a PC or other audio devices
to this unit.
1 Press AUX repeatedly to cycle through
GAME, PC IN, TV and DVD sources.
2 Connect the white and red audio cables
(notsupplied)to:
• the AUX sockets on the back of the
main unit, and
• the headphone socket on a PC, or the
AUDIO OUT socket on an external
device.
3 Play audio on the device (refer to the user
manualofthedevice).
Tip
• To exit AUX mode and enjoy audio from other sources,
press AUX repeatedly to select [AUX OFF].
DVD
L
R