Philips PET800 - Troubleshooting and Service Tips; Region Code Change Procedure

5.0 TROUBLESHOOTING & SERVICE TIPS
5.1 Procedure to change regioncode
1. Power on player and open DVD Door.
2. Press <Set Up> at Remote Control. In <Set Up Menu> select <Preferences> and press <OK>.
3. For PET800 - Press successively 2 1 2 2 2 5. . .
4. Display will show <Region Code 2> for Europe:
5. Press key to input preference region code (see below table).
6. Switch off and re-switch on the product.
7.
Region
Code
Region
1 USA
2 EUROPE
3 ASIA PACIFIC
4
AUSTRALIA,
NEW ZEALAND,
LATAM
5
RUSSIA, INDIA
6
CHINA
REMARKS:
1. Password is CONFIDENTIAL.
2. Region code is printed on product type plate. Due to DVD legislation region codes different to
assigned region may not be released.
Verify Region code change done.