3. Daily operation
The OSD menu time-out value can be adjusted in the OSD menu (OSD menu time-out).
The OSD lock function c an be enabled or disabled in the OSD menu (OSD lock).
The OSD menu position can be adjusted in the OSD menu (OSD menu position).
To navigate t hrough the OSD menus
•Usetheor key to scroll up or down through the different menu pages, change values or make
selections.
• Togointoasubmenuorconfirm adjustments and selections, use the
key.
• To exit a menu or return to the previous menu level, scroll the top level item of the current menu, then
press the
key.
3.4 Brig htness ad justment
To adjust the brightness
• If the OSD is locked (default setting), first press and hold both the and keys for approximately
3 seconds, until a pop up warns you that the OSD has been unlocked for about 20 sec. Afterwards,
press the brightness increase (
)orbrightnessdecrease( ) keys to adjust the brightness as desired.
Or,
If the OSD is not locked, press the brightness increase (
) or brightness decrease ( ) keys to adjust the
brightness as desired.
The OSD lock function c an be enabled or disabled in the OSD menu (OSD lock).
To force MAX brightness ON
When brightness is at 100%, by keeping the Up / Brightness increase key ( ) pressed for at least 3
seconds, the brightness is forced to the MAX brightness mode, which adds up 20 cd/m² to the default
stabilized brightness value. Press the Menu / Enter key (
) to exit the MAX brightness mode.
10
K5902097 (451920611672) PS27QHDCR 22/05/2015
To Next Page