Philips SA4DOT02BN/37 - Repair Player; Reset the Player; Repair Player via Philips Songbird

16 EN
7 Repair the
player through
Philips Songbird
If SOUNDDOT is not working properly or the
display freezes, you can reset it without losing
data:
To reset SOUNDDOT?
• Insert a pen tip or other object into the
reset hole at the base of SOUNDDOT.
Hold until the player shuts down.
If you fail to reset the player, repair the player
through Philips Songbird:
1 On your PC, launch Philips Songbird.
• If your PC runs Windows 7, launch
Philips Songbird as administrator.
Right-click Philips Songbird and select
Run as Administrator.
2 In Philips Songbird,
• select Tools > Repair my Philips
Device;
• select SOUNDDOT in the pop-up list.
3 Connect the player to the PC.
• Make sure that you follow the
onscreen instructions on how to
connect the player to the PC.
4 Follow the onscreen instructions to
complete the repair.