Philips SHAVER 7300 SERIES - LED Display

12
ENGLISH
LED Display
◗ Remove any sticker or protective foil from
the display before using shaver.
◗ The display provides the following
information:
◗ Charging Indicator
C
- Quick charge: When the shaver does NOT
contain enough energy for one shave, the
charging light will blink quickly.
- If the shaver does contain enough energy for one
shave, the charging light will blink slowly.
◗ Full Charge Indicator
C
- When the battery has been fully charged,
the charging light lights up continuously.
After approximately 30 minutes the display
automatically switches off again.
- If the on/off button is pressed during or after
charging, the 'unplug for use' symbol will blink
indicating the shaver is still connected to the
electrical outlet.
◗ Low Battery Indicator
C
- When the battery is almost empty (5 or less
shaving minutes left), the charging light
blinks orange.
C
◗ 'Unplug For Use' Indicator
The 'unplug for use' symbol will blink to remind
you the shaver is connected to the outlet.