Philips ShowView DVDR 730/00 - Resetting the machine to the default factory settings; Remote control does not work:; Data transfer from TV set via EASYLINK does not work:; No playback on DVD recorder:

66
Changing the PIN code
Preparation:
•) Switch on the TV set, and if necessary, select the programme
number for the DVD recorder.
•) Switch on the DVD recorder.
1 Press the SYSTEM MENU button on the remote control.
P The menubar appears.
2 Select the '
A
' icon using D or C .
3 Select '
1
(Disc features)' using B or A and confirm with C .
Disc features
Access control Enter code…
Auto resume On
4 Confirm 'Access control' using C .
5 Enter your four-digit PIN code. If the code is new, you may have to
enter the code a second time as confirmation.
6 Select 'Change code' using A or B and confirm with C .
7 Enter the new code using the number buttons 0..9 . Enter the
same code again as confirmation.
8 Quit using D and SYSTEM MENU .
I have forgotten my code
Press STOP h four times (step
5 ), then press OK . Access
control is now switched off. You can now enter a new code as described
above.
Access control (Child Lock)