Note: It is normal to see a slight gap between
the brush head and the handle.
3 Wet the bristles.
4 Apply a small amount of toothpaste on the
bristles.
5 Place the toothbrush bristles against the teeth
at a slight angle (45 degrees), pressing firmly to
make the bristles reach the gumline or slightly
beneath the gumline. A change in vibration (and
a slight change in sound) alerts you when you
apply too much pressure while brushing.
Note: Keep the center of the brush in contact
with the teeth at all times.
6 Press the power on/off button to turn on the
Philips Sonicare.
7 Gently keep the bristles placed on the teeth
and in the gumline. Brush your teeth with small
back and forth motion so the bristles reach
between the teeth.
Note: The bristles should slightly flare. Do not
scrub.
13
English
To Next Page
Loading...
