Brushing modes
Your power toothbrush is equipped with two
modes.
Clean mode
Clean is a 2-minute mode. It gives you a thorough
and complete clean and is recommended to be
used with the C2 Optimal Plaque Control brush
head.
Sensitive mode
Sensitive is an extra gentle 2 minute mode for
sensitive teeth and gums.
Changing modes
Your power toothbrush gives you the option to
choose between low and high intensity.
Note: When you use the toothbrush for the first
time, the default setting is the low intensity.
- Press the power button once to turn on the
toothbrush.
- Press a second time within 2 seconds to
change the intensity.
- Press a third time within 2 seconds to pause.
After 2 seconds of brushing, pressing the power
button again will also pause the toothbrush.
Using your Philips Sonicare
Brushing instructions
1 Press the brush head onto the handle in such a
way that the bristles will face the front of the
handle.
2 Firmly press the brush head down onto the
metal shaft until it stops.
12
English
To Next Page
Loading...
