1 Attach the attachment to the appliance (‘click’).
2 Switch on the appliance.
3 Carefully insert the trimming head into one of your
nostrils.
Do not insert the attachment more than 0.5cm into
your nostrils.
4 Slowly move the trimming head around to remove all
unwanted hairs in your nostrils.
5 Switch o the appliance and clean the attachment
after use.
Trimming ear hair
When trimming ear hair, make sure your outer ear
channels are clean and free from wax.
1 Attach the attachment to the appliance (‘click’).
2 Switch on the appliance.
3 Slowly move the trimming head along the rim of the
ear to remove hairs that stick out beyond the rim.
4 Carefully insert the trimming head into the outer ear
channel.
Do not insert the trimming head more than 0.5cm
into your ear channel, as this could damage the
eardrum.
max.
5mm
max.
5mm
41
SP9883_EN_A6_cc2020_0302.indd 41SP9883_EN_A6_cc2020_0302.indd 41 2023/03/02 18:192023/03/02 18:19
To Next Page
Loading...
