Philips SP9883/36 - Storage and Accessories

English
2 Press the release button on the shaving unit and pull
the shaving head holder o the shaving unit.
3 Remove the shaving heads from the shaving head
holder. Discard the used shaving heads immediately
to avoid mixing them with the new shaving heads.
4 After replacing the shaving heads, you can reset the
replacement reminder by pressing the on/o button
for 7 seconds. Wait until your hear 3 beeps.
If you do not reset the replacement reminder, the
shaver resets automatically after 9 shaves.
Storage
Store the shaver in a safe and dry place, using the storage
pouch provided.
Note: Always let the shaver dry completely before you
store it in the pouch.
Ordering accessories
To buy accessories or spare parts, visit www.philips.
com/parts-and-accessories or go to your Philips dealer.
You can also contact the Philips Consumer Care Center
in your country (see the international warranty leaet for
contact details).
The following accessories and spare parts are available:
- SH91 Philips shaving heads
- HQ110 Philips shaving head cleaning spray
- RQ111 Philips beard styler attachment
- RQ585 Philips cleansing brush attachment
SH91
7 sec.
50
SP9883_EN_A6_cc2020_0302.indd 50SP9883_EN_A6_cc2020_0302.indd 50 2023/03/02 18:192023/03/02 18:19