Philips SP9883/36 - Page 50

English
If rinsing the trimming head under the tap is not
sucient, immerse the trimming head in a glass with
warm water for a few minutes. Then switch on the
appliance and rinse it under the tap.
4 Carefully shake o excess water and let the nose
trimmer attachment dry.
Tip: For optimal trimmer performance, lubricate the
trimming head with a drop of sewing machine oil every
six months.
Replacement
Replacing the shaving heads
For maximum shaving performance, we advise you
to replace the shaving heads every two years.Replace
damaged shaving heads immediately.
Always replace the shaving heads with original Philips
shaving heads (see 'Ordering accessories').
Replacement reminder
The replacement reminder indicates that the shaving
heads need to be replaced. The shaving unit symbol
lights up continuously, the arrows ash white and you
hear a beep when you switch the shaver on or o.
1 Switch o the shaver.
2 min.
Max.
2yrs
49
SP9883_EN_A6_cc2020_0302.indd 49SP9883_EN_A6_cc2020_0302.indd 49 2023/03/02 18:192023/03/02 18:19