5 Remove the shaving heads from the shaving head
holder. Each shaving head consists of a cutter and
guard.
Note: Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving guard,
it may take several weeks before optimal shaving
performance is restored.
6 Clean the cutter and guard under the tap.
You can also use the cleaning brush to remove excess
hairs before rinsing.
7 Shake o excess water.
8 Put the cutter back into the guard.
9 Place the shaving heads in the shaving head holder.
10 Place the retaining ring on the shaving head.
11 Align the arrows on the retaining ring with the
projections in the shaving head holder. Turn the ring
clockwise until it clicks to indicate that the ring is
xed.
47
SP9883_EN_A6_cc2020_0302.indd 47SP9883_EN_A6_cc2020_0302.indd 47 2023/03/02 18:192023/03/02 18:19
To Next Page
Loading...
