Philips SP9883/36 - Page 55

English
Problem Possible cause Solution
 The rechargeable
battery is empty.
Recharge the battery (see
'Charging').
 The travel lock is
activated.
Press the on/o button for
3 seconds to deactivate the
travel lock.
The shaving unit is
soiled or damaged to
such an extent that the
motor cannot run.
Clean the shaving heads
thoroughly or replace them.
Theappliance
doesnot shave as
well as it used to.
The shaving heads are
damaged or worn.
Replace the shaving heads
(see 'Replacement').
 Hairs or dirt obstruct
the shaving heads.
Clean the shaving heads
in the regular way or clean
them thoroughly.
I replaced the
shaving heads,
but the display
still shows the
replacement
reminder.
You have not reset the
appliance.
Reset the appliance by
pressing the on/o button
for approx. 7 seconds.
A shaving unit
symbol has suddenly
appeared on the
display.
This symbol reminds
you to replace the
shaving heads.
Replace the shaving heads
(see 'Replacement').
The notication
symbol ashes and
the shaver beeps
while the shaver is
charging.
The appliance is
overheated.
When this happens, the
shaver stops charging
automatically. Charging
continues once the
temperature of the shaver
has decreased to the normal
level after approx. 10
minutes.
54
SP9883_EN_A6_cc2020_0302.indd 54SP9883_EN_A6_cc2020_0302.indd 54 2023/03/02 18:192023/03/02 18:19