Remote controls
8.
9.
10.
11.VOL-
12.TUNING-
13.TUNING+
1.
2.MUTE
3.0~9
4.SOURCE
5.BASS-/+
6.EQ
7.VOL+
* AVAILABLE IF CONNECTED
1. ----- Turn on/Stand-by the speaker.
2. Mute----- Press “MUTE ” to activate or deactivate mute.
3. 0-9 ----- Numeric keys, with the help of these keys you select
song or track in USB*, and in FM, you can key in station frequency,
i.e. for 927 key in 92.7.
4. SOURCE ----- Select the input/source- AU for Audio, Cd for CD,
Ud for USB*, Sd for SD*, 88.3 for FM, bt for Bluetooth.
5. BASS-/+ ----- To decrease/ increase the bass.
6. Equalizer ----- NORMAL,CLASSIC,POP,JAZZ,POCK. (works only in
USB/SD mode)
7. VOL+ ----- Volume up.
8. ----- Plays/pauses songs alternately.in FM mode,
long press“ ”,it will enter into automatic search channel and
automatic save channel.
9. ----- Play the previous song by pressing “ ” at USB*
input mode. Choose previous channel by pressing “ ” at
FM input mode.
10. ----- Play the next song by pressing “ ” at USB*
input mode. Choose next channel by pressing “ ” at
FM input mode.
11. Vol- ----- Volume down.
12. TUNING- ----- Each time to search channel step by step(each
step(-) 0.1 MHz),Press“TUNING-”long time to search previous
channel,and play the channel automatically.
13. TUNING+ ----- Each time to search channel step by step(each
step 0.1 MHz),Press“TUNING+”long time to search next channel,
and play the channel automatically.
(1)
(3)
(4)
(6)
(7)
(9)
(12)
(2)
(5)
(8)
(10)
(11)
(13)
1. :
Press to turn on speaker,long press into stand-by.
Press “ ” on the USB*/SD*/BT mode for pause or play.
2. :
Press once to reduce the FM frequency0.1M,
long press for manual search for radio.
In USB*/SD*/BT mode, press “ ” play previous song.
3. VOL- :
Volume down.
4. SOURCE :
Change the input mode-AU for Audio, Cd for CD,
Ud for USB*, Sd for SD*, 88.3 for FM, bt for Bluetooth.
5
To Next Page
Loading...
