Philips SRP5004 User Manual

7EN
• If the device does not respond at all or not to all of the key
commands or if you cannot find the code for your brand,
enter ‘9, 9, 9, 9’ in step 3 and continue with step 4. The
remote control will now search its full database for a code
that works with your TV. Full database search may take up
to 15 minutes.
• Alternatively you can set up the universal remote control
with the learn feature as described in chapter 3.2.
2.3.1 Setting up the remote control for other devices
(STB, DVD player / recorder and VCR)
1 Make sure the device is turned on, fully operational and
able to respond to remote control commands. E.g. insert
a disc in the DVD player / recorder or a video cassette in
the VCR.
2 Then follow steps 2 to 6 of ‘Setting up the remote
control for your TV’. Make sure to use the correct device
selection key:
, or .
2.3.2 Improving keys
When correctly set up, the remote control should be able
to operate all your devices. However, when using the remote
control for the first time it might occur that some keys do
not yet function as expected.
In this case you can have the remote control search for
alternatives.
Note
Improving keys is not possible when the code was found
during full database search (with code ‘9, 9, 9, 9’).
During initial setup
1 Make sure the receiving device is able to respond.
E.g. when you try to repair the Play key for your DVD
player, make sure to insert a DVD into the DVD player
otherwise the Play key is not able to function.
2 Press the key that does not function, keep it pressed and
immediately release it when the device responds.
Repeat this for every key that does not function.
• Ifthekeystilldoesnotfunctionasexpected,trypressing
it again for a longer period of time.
After initial setup
1 Make sure the receiving device is able to respond.
E.g. when you try to repair the Play key for your DVD
player, make sure to insert a DVD into the DVD player
otherwise the Play key is not able to function.
Getting started English
SRP5004_86_Manual_Def.indd 7 01-06-09 12:33

Philips SRP5004 Specifications

General

Battery life	12 month(s)
Battery type	AAA
Battery technology	-
Number of batteries supported	2
Interface	IR Wireless
Input type	Press buttons
Product color	Black, Grey
Buttons quantity	49
Backlight buttons	Yes
Remote control proper use	DVD/Blu-ray, DVDR-HDD, SAT, TV, VCR
Certification	CE Mark
Maximum range	10 m
Languages support	DAN, DEU, DUT, ENG, FIN, FRE, NOR, SWE
Number of brands in database	> 1200
Package tare weight	84 g
Quantity outer carton	8 pc(s)
Carrier frequency range	24 - 55 kHz
EAN/UPC/GTIN (packaging)	8712581648282
Number of products included	1 pc(s)
Package type	Display
Package depth	30 mm
Package width	145 mm
Package height	275 mm
Package weight	268 g
Built-in display	No
Master (outer) case length	305 mm
Master (outer) case weight	2602 g
Master (outer) case net weight	1472 g
Master (outer) case tare weight	1130 g
Master (outer) case GTIN (EAN/UPC)	18712581648289

Weight and Dimensions

Weight	184 g