Automatic Channel Setup (cont’d) 13
2
Press the PLAY button or the STOP button repeatedly to
select CHANNEL SET UP. Then, press the F.FWD but-
ton.
3
Press the PLAY button or the STOP button repeatedly to
select ADD/DELETE CH. Then, press the F.FWD button.
4
Press the Number buttons, the PLAY button, or the
STOP button repeatedly until your desired channel num-
ber appears.
5
Press the F.FWD button or the REWIND button so that
ADD or DELETE flashes on-screen.
6
While your choice is flashing, press the COUNTER
RESET/EXIT button. The channel you added or deleted will
appear. The channel will be added or deleted, whichever was
flashing on-screen when you exited the menu.
ADD / DELETE CH
0 2 (TV)
2-3
CHANNEL SET UP
→ TV [ON]
CATV
ADD/DELETE CH
Adding/Deleting Channels
The channels you no longer receive or seldom watch can be
deleted from the memory. You also may add new channels into
the memory. Make sure:
● The VCR is on and in VCR position. (The VCR/TV light will
appear. If it does not, press the VCR/TV button once.)
1
Press the MENU button repeatedly until the INITIALIZE
menu appears.
1
5
4
6
5
To Next Page
Loading...
