16 Language Selection
Follow the steps below to change the language of the on-screen
menus and displays. Make sure:
● The VCR is on and in VCR position. (The VCR/TV light will
appear. If it does not, press the VCR/TV button once.)
2
Press the PLAY button or the STOP button repeatedly to
select LANGUAGE SELECT. Then, press the F.FWD but-
ton.
3
Press the PLAY button or the STOP button to select
ENGLISH or ESPAÑOL. [ON] will appear beside your choice.
4
Press the COUNTER RESET/EXIT button to exit.
INITIALIZE
→ CHANNEL SET UP
SETTING CLOCK
LANGUAGE SELECT
INITIALIZE
CHANNEL SET UP
SETTING CLOCK
→ LANGUAGE SELECT
LANGUAGE SELECT
→ ENGLISH [ON]
ESPAÑOL
1
Press the MENU button repeatedly until the INITIALIZE
menu appears.
1
4
2
3
• If you accidentally select Spanish
on-screen displays and need English
on-screen displays:
1) Press the MENU button repeatedly
until the PARA INICIAR menu
appears.
2) Press the PLAY button or the STOP
button repeatedly to choose SELEC.
IDIOMA, then press the F.FWD but-
ton.
3) Press the PLAY button or the STOP
button to select ENGLISH.
4) Press the COUNTER RESET/EXIT
button to exit.
Helpful Hint
SVZ142.comb 4/7/99 6:30 PM Page 16
To Next Page
Loading...
Need help?
General
