Philips SW700M - Option 3: Set up Wireless Connection to a WPS Router Directly

10 EN
3 Tap Next on the above app screen, and
then read how to proceed with network
setup.
4 Select Wireless (WI-FI) under HOW DO
YOU WANT TO CONNECT?.
5 Select the name of your home Wi-Fi
network under Select a network to use
speaker.
6 Enter the password of your home Wi-Fi
network, and then tap Done to nish
setup.
7 Wait until successful connection of the
speaker to your home Wi-Fi network.
» The speaker beeps.
» The Wi-Fi status indicator on the
SETUP button turns off.
» The system status indicator on the
front panel turns solid green.
Option 3: Set up wireless
connection to a WPS router
directly
1 As instructed on the app, press and hold
WPS on the back of SW700M for more
than 3 seconds.
» The Wi-Fi status indicator on the WPS
button blinks green.
WPS